Not many know but worn suspension bushings have an effect on braking performance. In particular these bushings tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Suffering uneven tyre wear, unbalanced braking or a less predictable front end while cornering. It could be your leading arm bushings have failed. Replace these worn parts with Nolathane's superior formulation bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
REVIEWS
Nolathane - Radius Arm-to-Chassis Bushing Kit
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - Radius Arm-to-Chassis Bushing Kit works with the following vehicles.
1965 ford f 100
1965 ford f 250
1966 ford bronco base
1966 ford f 100
1968 ford bronco roadster
1969 ford e 100
1970 ford bronco base
1970 ford bronco wagon
1970 ford f 100
1970 ford f 250
1972 ford e 100
1972 ford e 200
1973 ford e 200
1973 ford f 100
1973 ford f 250
1974 ford f 250
1975 ford bronco custom
1975 ford bronco northland
1975 ford bronco ranger
1975 ford e 100
1975 ford e 100
1975 ford e 100
1975 ford e 150
1975 ford f 100
1975 ford f 150
1975 ford f 150
1975 ford f 250
1975 ford f 250
1976 ford bronco custom
1976 ford bronco sport
1976 ford f 100
1976 ford f 100
1976 ford f 150
1976 ford f 150
1976 ford f 250
1976 ford f 250
1977 ford bronco sport
1977 ford f 100
1977 ford f 100
1977 ford f 150
1977 ford f 150
1977 ford f 150
1978 ford bronco custom
1978 ford bronco northland
1978 ford bronco ranger
1978 ford f 150
1978 ford f 250
1979 ford bronco custom
1979 ford f 100
1979 ford f 100
1979 ford f 100
1992 ford e 250
1996 ford e 350
1997 ford e 250
1997 ford e 350
2002 ford excursion limited
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
