Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane bushings that offer long lasting durability for a safer more predictable vehicle.
Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane bushings that offer long lasting durability for a safer more predictable vehicle.
REVIEWS
Front Sway bar - mount bushing
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Front Sway bar - mount bushing works with the following vehicles.
1980 ford bronco custom
1980 ford f 100
1980 ford f 100
1980 ford f 150
1980 ford f 150
1980 ford f 250
1980 ford f 350
1980 ford f 350
1981 ford bronco ranger
1981 ford f 100
1981 ford f 100
1981 ford f 150
1981 ford f 150
1981 ford f 250
1981 ford f 250
1981 ford f 350
1982 ford bronco custom
1982 ford bronco xls
1982 ford f 100
1982 ford f 100
1982 ford f 100
1982 ford f 100
1982 ford f 150
1982 ford f 250
1982 ford f 250
1982 ford f 350
1982 ford f 350
1983 ford bronco custom
1983 ford bronco xls
1983 ford f 100
1983 ford f 100
1983 ford f 150
1983 ford f 150
1983 ford f 250
1983 ford f 350
1984 ford f 150
1984 ford f 250
1984 ford f 350
1985 ford bronco custom
1985 ford bronco eddie
1985 ford f 150
1985 ford f 250
1985 ford f 350
1985 ford f 350
1986 ford bronco custom
1986 ford bronco eddie
1986 ford f 150
1986 ford f 150
1986 ford f 250
1986 ford f 350
1986 ford f 350
1987 ford bronco custom
1987 ford bronco eddie
1987 ford f 150
1987 ford f 250
1987 ford f 350
1988 ford bronco custom
1988 ford bronco eddie
1988 ford f 150
1988 ford f 250
1988 ford f 350
1989 ford f 150
1989 ford f 150
1989 ford f 250
1989 ford f 350
1990 ford bronco custom
1990 ford bronco eddie
1990 ford f 150
1990 ford f 150
1990 ford f 250
1990 ford f 350
1991 ford bronco custom
1991 ford bronco eddie
1991 ford f 150
1991 ford f 150
1991 ford f 150
1991 ford f 250
1991 ford f 350
1992 ford f 350
1992 ford f 350
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
