Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane bushings that offer long lasting durability for a safer more predictable vehicle.
Nolathane - Strut/Control Arm-to-Chassis Mount Bushing Set
Not many know but worn suspension bushings have an effect on braking performance. Strut rod bushings in particular tend to absorb most of the loads under braking resulting in severe wear and reduced braking efficiency over time. Replace these worn parts with Nolathane bushings that offer long lasting durability for a safer more predictable vehicle.
REVIEWS
Nolathane - Strut/Control Arm-to-Chassis Mount Bushing Set
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
INSTALLATION book
Nolathane - Strut/Control Arm-to-Chassis Mount Bushing Set
Nolathane - Strut/Control Arm-to-Chassis Mount Bushing Set
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - Strut/Control Arm-to-Chassis Mount Bushing Set works with the following vehicles.
1973 ford f 100
1973 ford f 250
1973 ford f 350
1974 ford f 250
1974 ford f 350
1975 ford f 100
1975 ford f 150
1975 ford f 150
1975 ford f 250
1975 ford f 250
1975 ford f 350
1976 ford f 100
1976 ford f 100
1976 ford f 150
1976 ford f 150
1976 ford f 250
1976 ford f 250
1976 ford f 350
1977 ford f 100
1977 ford f 100
1977 ford f 150
1977 ford f 150
1977 ford f 150
1978 ford f 150
1978 ford f 250
1979 ford f 100
1979 ford f 100
1979 ford f 100
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
