Nolathane - C-Bushing 4 Deg Offset - Set Of 4
Worn C bushings can cause changes in drivability and handling, alignment settings and caster changes. Can make vehicle unbalanced when braking, less predictable in cornering and cause uneven Tire wear. Replace worn C bushings to as new condition with Nolathane bushings. they come in varying positive caster off sets of 2 degree offset for stock up to 2" lift , 4 degree offset for 2" to 4" lift , and 7 degrees offset for more than 4" lift. Nolathane bushings are made from the highest quality elastomers and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance.Nolathane - C-Bushing 4 Deg Offset - Set Of 4
Installation Guide: Download Now
Installation Time (hours): 4
Difficulty: Trade Specialist
Wheel Alignment Required? No
Nolathane - C-Bushing 4 Deg Offset - Set Of 4
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
- Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
- Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
- Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
- Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
- NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
Nolathane - C-Bushing 4 Deg Offset - Set Of 4 works with the following vehicles.
- 1966 ford bronco base
- 1968 ford bronco base
- 1970 ford bronco base
- 1973 ford bronco base
- 1975 ford bronco custom
- 1975 ford f 100
- 1975 ford f 100
- 1975 ford f 150
- 1976 ford bronco custom
- 1976 ford f 100
- 1976 ford f 150
- 1977 ford f 100
- 1977 ford f 150
- 1978 ford bronco custom
- 1979 ford bronco custom
- 1979 ford f 100
- 1979 ford f 150