Nolathane - Service Kit - Single Center Pivot Bushing Assembly (Suits REV100.0004)
Once you have purchased a REV100.0002 kit, when the bushings require servicing simply purchase this kit and reuse the current hardware.
REVIEWS
Nolathane - Service Kit - Single Center Pivot Bushing Assembly (Suits REV100.0004)
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
INSTALLATION book
Nolathane - Service Kit - Single Center Pivot Bushing Assembly (Suits REV100.0004)
Nolathane - Service Kit - Single Center Pivot Bushing Assembly (Suits REV100.0004)
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - Service Kit - Single Center Pivot Bushing Assembly (Suits REV100.0004) works with the following vehicles.
1990 acura integra gs
1991 acura integra gs
1992 acura integra gs
1993 acura integra gs
1993 acura integra gs
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
