Nolathane - Coil Spring Isolator - Front Upper - 50mm/2" Lift
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 models) or looking to obtain that preferred ride height setting Nolathane spring pads are an economical solution.Nolathane - Coil Spring Isolator - Front Upper - 50mm/2" Lift
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
- Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
- Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
- Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
- Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
- NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
Nolathane - Coil Spring Isolator - Front Upper - 50mm/2" Lift works with the following vehicles.
- 2018 jeep wrangler rubicon
- 2019 jeep wrangler rubicon
- universal parts