Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 Models), looking to obtain that preferred ride height setting or improve steering and response times. Nolathane spring pads are an economical solution.
Nolathane - Spring Pad Isolator (54mm ID, 96mm OD, 18.5mm L)
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 Models), looking to obtain that preferred ride height setting or improve steering and response times. Nolathane spring pads are an economical solution.
REVIEWS
Nolathane - Spring Pad Isolator (54mm ID, 96mm OD, 18.5mm L)
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
INSTALLATION book
Nolathane - Spring Pad Isolator (54mm ID, 96mm OD, 18.5mm L)
Nolathane - Spring Pad Isolator (54mm ID, 96mm OD, 18.5mm L)
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - Spring Pad Isolator (54mm ID, 96mm OD, 18.5mm L) works with the following vehicles.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
