Nolathane - Extended Bump Stop

Regular price: $30.60
Sale price: $30.60
Regular price
Unit price: per

IN STOCK In Stock! Ships within 24 hours

Free Shipping
Lifetime warranty
24/7 Customer Support available!

Quantity must be 1 or more

SKU: REV218.0086

TYPE: Bushing Kit

PLACEMENT: Front

Nolathane - Extended Bump Stop

Nolathane's bump replace those worn OE bump stops with a bushing that will last. Reduce the risk of worn bump stops damaging your vehicle.

Nolathane - Extended Bump Stop

Installation Guide: Download Now

Installation Time (hours): 2

Difficulty: DIY - With Specialist Tools

Wheel Alignment Required? No

Nolathane - Extended Bump Stop

Lubrication Guide

In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing

Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturerâ€™s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.

Nolathane - Extended Bump Stop works with the following vehicles.

1984 jeep cherokee base
1985 jeep cherokee base
1986 jeep cherokee base
1988 jeep cherokee base
1991 jeep cherokee base
1992 jeep cherokee base
1993 jeep grand cherokee
1994 jeep cherokee base
1994 jeep grand cherokee
1996 jeep cherokee classic
1997 jeep cherokee country
1997 jeep grand cherokee
1997 jeep wrangler base
1997 jeep wrangler sahara
1997 jeep wrangler se
1998 jeep cherokee classic
2001 jeep wrangler 60

Mitsubishi rear differential bushings

Should have purchased these sooner, factory bushings had failed twice since owning vehicle. After Nolathane bushings were installled, never looked back. Now looking to use Nolathane bushings for control arms on another vehicle.

UCA 5th Gen 4Runner

Installed these 2 years ago. Holding up well in the Midwest winters and light off roadiing. Great for negative offset wheels.

Don't buy for Steering Rack

With regards to the 100 series Land Cruiser, the stiffer Nolothane bushings created issues with the VSC. It seems that the VSC was overly sensitive once the new bushings were put on causing the vehicle skid control to activate during mild turning causing the ABS system to activate needlessly. Prior to installing the bushings this problem did not exist and I am certain it is because the rack needs some amount of movement as it did with the rubber. If you are going to replace steering rack bushings I 'd suggest going with OEM equipment.

Excellent quality.

Excellent quality, perfect fit, huge improvement over stock rubber bushings and still flexable enough to not make you regret the install everytime you arent drivi g on perfectly smooth roads. What more could you ask for?

Superb parts

Quality replacement that really restored my suspension to like new

Nolathane - Extended Bump Stop

Lubrication Guide

Verify fitment with your vehicle

Let customers speak for us