Nolathane's sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Nolathane 30mm fixed sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
Nolathane - 30mm Heavy Duty Front Sway Bar Kit (GM A-Body)
Nolathane's sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Nolathane 30mm fixed sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.
REVIEWS
Nolathane - 30mm Heavy Duty Front Sway Bar Kit (GM A-Body)
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
INSTALLATION book
Nolathane - 30mm Heavy Duty Front Sway Bar Kit (GM A-Body)
Nolathane - 30mm Heavy Duty Front Sway Bar Kit (GM A-Body)
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - 30mm Heavy Duty Front Sway Bar Kit (GM A-Body) works with the following vehicles.
1964 buick skylark base
1964 buick special base
1964 chevrolet chevelle base
1964 chevrolet el camino
1964 chevrolet malibu base
1964 oldsmobile 442 base
1964 oldsmobile cutlass base
1964 oldsmobile f85 base
1964 oldsmobile vista cruiser
1964 pontiac gto base
1964 pontiac lemans base
1965 buick gran sport
1965 chevrolet chevelle base
1965 chevrolet el camino
1965 chevrolet malibu base
1965 oldsmobile 442 base
1965 oldsmobile cutlass base
1965 oldsmobile f85 base
1965 pontiac gto base
1965 pontiac lemans base
1966 buick skylark base
1966 buick special base
1966 chevrolet chevelle base
1966 chevrolet el camino
1966 chevrolet malibu base
1966 oldsmobile 442 base
1966 oldsmobile cutlass base
1966 oldsmobile f85 base
1967 buick skylark base
1967 chevrolet chevelle 300
1967 chevrolet el camino
1967 chevrolet malibu base
1967 oldsmobile 442 base
1967 oldsmobile cutlass supreme
1967 oldsmobile f85 base
1967 pontiac gto base
1967 pontiac lemans base
1967 pontiac tempest base
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
