Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 models) or looking to obtain that preferred ride height setting Nolathane spring pads are an economical solution.
Nolathane - 30mm Front Spring Bad Bushing (Single)
Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 models) or looking to obtain that preferred ride height setting Nolathane spring pads are an economical solution.
REVIEWS
Nolathane - 30mm Front Spring Bad Bushing (Single)
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
INSTALLATION book
Nolathane - 30mm Front Spring Bad Bushing (Single)
Nolathane - 30mm Front Spring Bad Bushing (Single)
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - 30mm Front Spring Bad Bushing (Single) works with the following vehicles.
1984 jeep cherokee base
1984 jeep wagoneer base
1985 jeep cherokee base
1986 jeep cherokee base
1986 jeep wagoneer limited
1987 jeep cherokee base
1987 jeep comanche base
1987 jeep comanche chief
1988 jeep cherokee base
1989 jeep wagoneer limited
1991 jeep cherokee base
1991 jeep comanche base
1991 jeep comanche eliminator
1992 jeep cherokee base
1997 jeep wrangler sahara
1997 jeep wrangler se
1998 jeep cherokee classic
1998 jeep cherokee limited
1998 jeep wrangler sahara
1998 jeep wrangler se
1999 jeep cherokee classic
1999 jeep cherokee limited
2000 jeep cherokee classic
2002 jeep wrangler x
2007 jeep wrangler sahara
2007 jeep wrangler unlimited
2009 jeep wrangler sahara
2009 jeep wrangler unlimited
2010 jeep wrangler sport
2010 jeep wrangler unlimited
2013 jeep wrangler sahara
2013 jeep wrangler unlimited
2015 jeep wrangler sahara
2016 jeep wrangler 75th
2018 jeep wrangler jk
2018 jeep wrangler jk
2018 jeep wrangler jk
universal parts
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
