Nolathane bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD’s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
Nolathane bushings are made tough and offer outstanding abrasion resistance, high load bearing capability (4WD?��s, utes and towing), flexibility, increased tensile strength and chemical resistance to oil, grease, ozone and weathering.
REVIEWS
Nolathane - Front Tie Rod Dust Boots
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
LUBRICATION opacity
Nolathane - Front Tie Rod Dust Boots
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - Front Tie Rod Dust Boots works with the following vehicles.
1976 chevrolet g10 beauville
1976 chevrolet g30 beauville
1978 chevrolet g10 beauville
1979 ford f 350
1979 ford f 350
1979 ford f 350
1979 gmc g1500 rally
1981 ford f 350
1981 gmc g2500 rally
1983 ford f 350
1983 gmc g3500 magnavan
1984 chevrolet s10 blazer
1985 chevrolet s10 base
1987 chevrolet blazer custom
1988 gmc c1500 sierra
1988 gmc c1500 sierra
1988 gmc c2500 sierra
1989 chevrolet blazer scottsdale
1989 chevrolet g30 beauville
1990 gmc c1500 sierra
1991 chevrolet blazer scottsdale
1991 chevrolet g20 beauville
1993 chevrolet blazer cheyenne
1993 chevrolet g10 beauville
1993 chevrolet g30 beauville
1994 gmc c2500 suburban
1994 gmc k1500 sierra
1996 ford f 350
1996 gmc c1500 suburban
1996 gmc k1500 sierra
1996 gmc k1500 sierra
1998 gmc c1500 suburban
1998 gmc c2500 suburban
1998 gmc k1500 sierra
2002 chevrolet s10 base
2002 chevrolet s10 zr2
2002 chevrolet s10 zr5
2004 chevrolet blazer ls
2004 chevrolet blazer zr2
2004 chevrolet s10 ls
2004 chevrolet s10 zr5
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.