Free Shipping Nationwide
Competitive Lifetime Warranty
Expert Support: (909) 476-2860
Nolathane - 30mm Heavy Duty Front Sway Bar Kit
Nolathane - 30mm Heavy Duty Front Sway Bar Kit
Nolathane - 30mm Heavy Duty Front Sway Bar Kit
  • Load image into Gallery viewer, Nolathane - 30mm Heavy Duty Front Sway Bar Kit
  • Load image into Gallery viewer, Nolathane - 30mm Heavy Duty Front Sway Bar Kit
  • Load image into Gallery viewer, Nolathane - 30mm Heavy Duty Front Sway Bar Kit

Nolathane - 30mm Heavy Duty Front Sway Bar Kit

Regular price
$225.00
Sale price
$225.00
Regular price
Sold out
Unit price
per 

IN STOCK In Stock! Ships within 24 hours

  • Check Icon Free Shipping
  • Check Icon Lifetime warranty
  • Check Icon 24/7 Customer Support available!

SKU: REV003.0130
TYPE: Sway Bar
PLACEMENT: Front

Nolathane - 30mm Heavy Duty Front Sway Bar Kit

Engineered to 'Nolathane Your Car', sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Nolathane sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Nolathane - 30mm Heavy Duty Front Sway Bar Kit

Installation Guide: Download Now

Installation Time (hours): 3

Difficulty: DIY - Do It Yourself

Wheel Alignment Required? No

Nolathane - 30mm Heavy Duty Front Sway Bar Kit

Lubrication Guide

In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing

  • Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
  • Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
  • Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
  • Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
  • NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.

Nolathane - 30mm Heavy Duty Front Sway Bar Kit works with the following vehicles.

Verify fitment with your vehicle

(Change vehicle)
  • 1963 ford falcon base
  • 1963 mercury comet base
  • 1964 ford falcon base
  • 1965 ford falcon base
  • 1965 ford mustang base