Do you have every sway bar link on the shelf? Well you don't need too, Nolathane have developed a clever cut to length universal sway bar link that has a 12mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.
Front Sway bar - link works with the following vehicles.
1995 nissan pathfinder le
1995 nissan pathfinder se
1996 nissan pathfinder le
1997 infiniti qx4 base
1998 nissan pathfinder le
1999 infiniti qx4 base
2000 mitsubishi montero base
2000 mitsubishi montero sport
2001 mitsubishi montero limited
2001 mitsubishi montero sport
2001 toyota prius base
2002 infiniti qx4 base
2002 nissan pathfinder se
2003 infiniti qx4 base
2004 nissan pathfinder armada
2006 mitsubishi montero limited
2006 toyota camry base
2007 toyota camry ce
2007 toyota prius touring
2009 nissan pathfinder se
2011 chevrolet cruze eco
2011 chevrolet volt base
2012 chevrolet cruze eco
DETAILS
Front Sway bar - link
Do you have every sway bar link on the shelf? Well you don't need too, Nolathane have developed a clever cut to length universal sway bar link that has a 12mm ball stud has a working range of 80-320mm c/c. 1 part number covers hundreds of applications.
REVIEWS
Front Sway bar - link
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.