Nolathane - 30mm 3-Position Adjustable HD Rear Sway Bar Kit - Suits FE2/FE3 Suspension
Sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires thereby increasing cornering grip and improving outright performance. This Nolathane sway bar = more grip = better handling = outright performance - it's the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.Nolathane - 30mm 3-Position Adjustable HD Rear Sway Bar Kit - Suits FE2/FE3 Suspension
Installation Guide: Download Now
Installation Time (hours): 3
Difficulty: DIY - Do It Yourself
Wheel Alignment Required? No
Nolathane - 30mm 3-Position Adjustable HD Rear Sway Bar Kit - Suits FE2/FE3 Suspension
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
- Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
- Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
- Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
- Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
- NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
Nolathane - 30mm 3-Position Adjustable HD Rear Sway Bar Kit - Suits FE2/FE3 Suspension works with the following vehicles.
- 2010 chevrolet camaro ls
- 2012 chevrolet camaro 1lt
- 2013 chevrolet camaro ls
- 2014 chevrolet camaro ls
- 2015 chevrolet camaro ls