Link bushings or grommets are the connection between your sway bar and chassis. Worn link bushings can effect the vehicle handling and cornering performance, they are easy to install and are backed by a limited lifetime warranty. Nolathane bushings are made from the highest quality elastomers and designed to synchronize your suspension system for optimal safety, handling, performance and ride quality, longevity and reduced maintenance. They are the most positive link between your vehicle body, springs, struts, arms and shocks.
Nolathane - 15.9mm (5/8 inch) Sway Bar Mount Bushing Set
Designed to fit a 15.8mm sway bar. Nolathane's sway bar mount bushings not only boasts the latest in bushing material technology but feature a knurled ID specifically designed to retain grease. Backed up by a Limited Lifetime Warranty. Nolathane bushings are made from the highest quality elastomers and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.
REVIEWS
Nolathane - 15.9mm (5/8 inch) Sway Bar Mount Bushing Set
We value our customers feedback greatly. Let us know what you think of your Whiteline products by leaving a review below, or by reaching out to our Customer Support team. We look forward to hearing from you!
INSTALLATION book
Nolathane - 15.9mm (5/8 inch) Sway Bar Mount Bushing Set
Nolathane - 15.9mm (5/8 inch) Sway Bar Mount Bushing Set
Lubrication Guide
In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing
Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.
FITMENT
Nolathane - 15.9mm (5/8 inch) Sway Bar Mount Bushing Set works with the following vehicles.
1984 jeep cherokee base
1985 jeep cherokee base
1986 jeep cherokee base
1987 jeep cherokee base
1988 jeep cherokee base
1991 jeep cherokee base
1992 jeep cherokee base
1994 jeep cherokee country
1996 jeep cherokee classic
1997 jeep cherokee country
1998 jeep cherokee classic
1998 jeep cherokee limited
1999 jeep cherokee classic
1999 jeep cherokee limited
2000 jeep cherokee classic
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
