Free Shipping Nationwide
Competitive Lifetime Warranty
Expert Support: (909) 476-2860
Nolathane - Front Coil Spring Isolator Bushing
Nolathane - Front Coil Spring Isolator Bushing
Nolathane - Front Coil Spring Isolator Bushing
  • Load image into Gallery viewer, Nolathane - Front Coil Spring Isolator Bushing
  • Load image into Gallery viewer, Nolathane - Front Coil Spring Isolator Bushing
  • Load image into Gallery viewer, Nolathane - Front Coil Spring Isolator Bushing

Nolathane - Front Coil Spring Isolator Bushing

Regular price
$16.16
Sale price
$16.16
Regular price
$20.20
Sold out
Unit price
per 

PREORDER Available for Preorder. Stock due in 4-6 weeks

  • Check Icon Free Shipping
  • Check Icon Lifetime warranty
  • Check Icon 24/7 Customer Support available!

SKU: REV172.0008
TYPE: Bushing Kit
PLACEMENT: Front

Nolathane - Front Coil Spring Isolator Bushing

Whether its replacing deteriorated original units, to compensate loading one side of a vehicle (common to 4x4 Models), looking to obtain that preferred ride height setting or improve steering and response times. Nolathane spring pads are an economical solution.

Nolathane - Front Coil Spring Isolator Bushing

Installation Guide: Download Now

Installation Time (hours): 1.5

Difficulty: DIY - With Specialist Tools

Wheel Alignment Required? No

Nolathane - Front Coil Spring Isolator Bushing

Lubrication Guide

In the majority of applications the Nolathane bushings act as a flexible bearing and must be greased at the time of assembly.To gain optimum performance from Nolathane products take the following precautions when installing

  • Ensure all suspension parts are free from rust, scale, paint and previous rubber deposits.
  • Please use these hints along with any instructions provided when fitting Nolathane products. Vehicle manufacturers manual should be used to ensure Nolathane warranty compliance.
  • Shackle and mounting pins, control arm and spring eyes and shoulders must show no major signs of pitting or damage - any damaged components must be replaced or repaired to vehicle manufacturer’s tolerances.
  • Grease has been supplied in the kits where required and must be used to optimise bush performance and durability. Grease has been formulated from a reinforced No. 2 lithium complex base and selected additives with molybdenum disulphide for mechanical stability, extreme pressure qualities for extended life and a high melting or drop point be applied to the bores and outer flanges of all bushes and components - do not grease the outside surfaces of bushes and components.
  • NOTE: The major noise producing factor in polyurethane is incorrect fitment and uncleaned mating surfaces.

Nolathane - Front Coil Spring Isolator Bushing works with the following vehicles.

Verify fitment with your vehicle

(Change vehicle)
  • 1990 honda accord dx
  • 1992 honda prelude s
  • 1994 honda accord dx
  • 1996 honda prelude s
  • 1997 honda prelude base